 |
|
 |
 |
|
 |
|
View the Assembly Instructions in PDF format [Adobe Reader required] 
Take two of the clip halves and place them on the tabletop so that the ratchet parts stick up and through two of the holes in one of the sides - see Pic C. Take the other cloche side and place the tab end over the holes and clip halves. Take two more clip halves and locate each onto the ones already in place, make sure you align the ratchet parts at 90deg to each other and press firmly together - they should make a clicking sound - see Pic D. Do the same for the other corner of the cloche, making sure the tab part is on the inside of the cloche - see Pic E. Take your CosyClocheTM and sit it on a flat surface the right way up. Bend the lids into meet each other at the Handle Bar. Holding the two Handle Bars together at one end push, the now combined slotted tabs through the slot in the cloche end - see Pic F. Repeat this for the other end. pull up slightly to locate in the slots. Depending on which notch you decide will determine whether the CosyClocheTM is fully closed, partially vented or fully vented - see Pic G. Use the Ground Anchors to secure the CosyClocheTM - see pic H & J. Take your completed CosyClocheTM and place on a flat surface, a kitchen table will do fine. Open the top of your CosyClocheTM. Place the clip-in-base into your CosyClocheTM from the top making sure the tabs on the base are flexed up - pic K. Push all the way down to the table top and fix in place using the clips as you did for the CosyClocheTM- locate the clips in the holes closes to the corners of your CosyClocheTM. Remember - the clips should make a clicking sound - pic L. The slots in the ends of the base act as drainage holes. Take the two sides and lay them on a flat surface, a kitchen table will do fine. Join the sides together, making sure that the tabs are on the OUT- SIDE of the extension see pic M, as described above using the clips, tabs and holes. To fix to your CosyClocheTM take your assembled extension sides and place on a flat surface longways up. Keep one hand on the top of the extension sides - see pic N - and with the other pick up your assembled and closed CosyClocheTM. Now press down gently on the extension sides until the long sides bow out slightly. CosyClocheTM into the extension sides - see pic P. Turn the whole onto the table and pull the extension sides evenly onto the bottom of the CosyClocheTM. Align the holes at the bottom of your CosyClocheTM with the holes at the top of the extension sides and secure using the clips as for the CosyClocheTM. Use the holes closest to the corners. Hold down in the garden with the ground anchors supplied with your CosyClocheTM - see pic R. (it has fixing toggles attached to the handle bar) (it has toggles in the bottom and square holes in the handle bar) (8 half clips = 4 complete clips per pack) (8 half clips = 4 complete clips per pack) (8 half clips = 4 complete clips per pack) (8 half clips = 4 complete clips per pack) check the packaging and then call our help line Some or all the twin-wall plastic will have crease lines. Find these, and lay them on a flat surface, a kitchen table is ideal. Now gently fold the crease, over the edge of the table-top, both ways. Do this for all creases. All the CosyTM range of products use simple ratchet clips for assembly. The two halves are identical, align the ratchets at 90º, as shown in the picture (Pic A), and press firmly together (two clicks are enough). If you need to separate the clips, carefully use a blunt, broad blade. Slide the blade between the two pieces of twinwall plastic and twist firmly, be careful, the clips will separate at speed! (Pic B) the tabs locate and are secured. |
